Rule Pumps® - 498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump

Name: Rule Pumps® - 498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump
Brand: Rule Pumps
SKU: 4632513909

0 reviews|Item # 4632513909|Similar Products

Rule Pumps® - 12 V 498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump Rule Pumps® - 12 V 498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump with Float Switch Rule Pumps® - 24 V 498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump Rule Pumps® - 12 V 498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump with Float Switch

Rule Pumps® - Information Rule Pumps® - Information Rule Pumps® - Catalog Rule Pumps Authorized Dealer

$35.67 - $78.63

Availability Varies - Depends on Product Options

Notes:

This is a Special Order product and, therefore, Non-Cancellable and Non-Returnable once it is Used or Installed.

Authorized Dealer

Have a Question? Ask a Specialist

888.453.5144Live Chat

Product Details

498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump by Rule Pumps®. This bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the new series of bilge pumps. This Brand pumps are tested to the highest standard, resulting in higher flow with better efficiency for the toughest applications.

Notes

This is a Special Order product and, therefore, Non-Cancellable and Non-Returnable once it is Used or Installed.

Features

3 Year Warranty
Meets or exceeds RoHS, IMCI, CE and ISO standards
NMMA listed product
Completely submersible
Vented impeller housing to prevent the pump from becoming airlocked
Includes check valve to reduce water in bilge
Removable discharge fitting
Built-in Thermal Cut-Off (TCO) provides added protection for pump and vessel
90º fitting sold separately (pn 1201R)
Snap-off strainer base for easy maintenance
Sealed efficient, long life motors
Stainless steel motor shaft
Quiet operation
Marine grade silicon blocked, tin coated wiring
Non-automatic - used with a panel switch or Rule float switch

The need to create innovative, reliable products becomes an even greater challenge and priority. In the highly competitive, ever expanding global marketplace, products that prove twas acquired by ITT Industries and joined the Jabsco Worldwide family of companies,which today includes ITT Jabsco and ITT Flojet. This new synergistic alliance joins the strengths, expertise and resources of three companies, thereby guaranteeing the acceleratheir durability, safety and value will stand the test of time, and guarantee continued growth as well as customer loyalty and satisfaction. In 1998 Rule ed development and introduction of innovative marine productsof the highest quality. This year’s Rule Pumps® products offering promises to be the best ever. With the addition of some very exciting new products, Rule continues to develop the finest marine and recreational pumps, blowers, electronics, switches.

Brand:

Rule Pumps

Part Number:

25DA 25DA-35A 25DA-24

Warranty

Seller warrants the goods purchased hereunder will be free from defects in material and workmanship for a period as determined by the table below:

Rule Standard Bilge Pumps, Older Style - 3-year limited (location: on the wire, approximate 12" from the pump or on the flat part of the threads of the discharge nozzle)
Rule Gold Series Bilge Pumps - 5-year limited (location: on the wire, approximate 12" from the pump)
Rule Mate Series Bilge Pumps - 3-year limited (location: melted on the long side of the pump)
Rule Automatic (a.k.a Computerized) Bilge Pumps - 3-year limited (location: on the wire, approximate 12" from the pump)
Rule-A-Matic (35A and its variations) Float Switch - 2-year limited (location: on the underside of the base)
Rule-A-Matic Plus (40A and its variations) Float Switch - 2-year limited (location: on the underside of the base)
Rule SuperSwitch (37A and its variations) Float Switch - 5-year limited (location: on the underside of the base)
Rule Livewell Pumps - 3-year limited (location: on the side of the motor cartridge)
Rule General Purpose Pumps - 3-year limited (location: on the wire, approximate 12" from the pump)
Rule Shower Drain Systems - 3-year limited (location: on the wire, approximate 12" from the pump)
Rule Hand Pumps - 3-year limited (location: on the pump base)
Rule 140 and 240 (and its variations) Bilge Blowers - 1-year limited (location: between the mounting brackets)
Rule High Water Bilge Alarm - 1-year limited (location: back of alarm)
Rule Panel Switches - 1-year limited (location: rear of face plate)
Rule Bilge Hose - 1-year limited (location: N/A - Base on store receipt)

Except as otherwise required by law, Rule shall, at its option and at no cost to the customer, replace any product which fails to conform to the warranty. Under the replacement option, Rule shall not be obligated to remove or pay for the removal of the defective product or install or pay for the installation of the replaced or repaired product. Rule shall have sole discretion as to the method or means of repair or replacement.

The customer’s failure to comply with Rule’s repair or replacement directions shall terminate Rule’s obligations under this warranty and render this warranty void. Any parts repaired or replaced under the warranty are warranted only for the balance of the warranty period on the parts that were repaired or replaced.

Seller shall have no warranty obligations to the customer with respect to any product or parts of a product that have been:

repaired by third parties other than Rule or without Rule’s written approval;
subject to misuse, misapplication, neglect, alteration, accident, or physical damage;
used in a manner contrary to Rule’s instructions for installation, operation and maintenance;
damaged from ordinary wear and tear, corrosion, or chemical attack;
damaged due to abnormal conditions, vibration, failure to properly prime, or operation without flow;
damaged due to a defective power supply or improper electrical protection;
damaged resulting from the use of accessory equipment not sold or approved by Rule.

The foregoing warranty is provided in place of all other express warranties. All implied warranties, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, are limited to the duration specified in the above tables. Except as otherwise required by law, customer’s exclusive remedy and Rule’s aggregate liability for breach of any of the foregoing warranties are limited to repairing or replacing the product and shall in all cases be limited to the amount paid by the customer for the defective product. In no event shall seller be liable for any other form of damages, whether direct, indirect, liquidated, incidental, consequential, punitive, exemplary or special damages, including but not limited to loss of profit, loss of anticipated savings or revenue, loss of income, loss of business, loss of production, loss of opportunity or loss of reputation.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Rule Pumps® - 498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump

Rule Pumps® - 498 GPH Electric Non-Automatic Standard Impeller Submersible Bilge Pump

Product Details

Notes

Features

Related Links

Reviews