Specifications
| Output Power (Continuous) | |
|---|---|
| Surge Power | |
| Output Frequency Regulation | |
| Peak output current (Inverter) | |
| Output Voltage | |
| Output Wave Form | |
| Efficiency (Full Load) | |
| No-load power draw (inverting) | |
| Input DC voltage range | |
| AC Connections | |
| Output current (continuous at 25°C) | |
| Output voltage | |
| Output voltage range | |
| Charge control | |
| Charge temperature compensation | |
| Optmial Efficiency | |
| AC Input (Max. Charge) | |
| Input current (for maximum charging) | |
| Input AC voltage | |
| Input AC voltage range | |
| Dead battery charge | |
| Compatible battery types | |
| Transfer relay rating | |
| Transfer time (AC to inverter and inverter to AC) | |
| Optimal Operating Temperature Range | |
| Storage ambient temperature range | |
| Net Weight | |
| Unit Dimensions (H X W X L) | |
| Safety | |
| EMC |
Features
- Pure sine wave output to operate sensitive electronics
- Advanced configuration options for customized applications(A System Control Panel is required for all system configuration and setup)
- Parallel and series stacking capability
- Built-in transfer switch automatically transfers between inverter power and incoming AC power
- Power factor corrected, multi-stage charger for fast, efficient charging
- Temperature compensated charging for a variety of climate conditions
- Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power(When used with the remote panel)
- Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
- Conformal coated circuit boards for humid environments
- Ability to charge batteries drained to extremely low voltage
- Compatible with the Xantrex Automatic Generator Start(Sold separately)
- Battery over-voltage and under-voltage protection
- Over-temperature shutdown
- Automatic overload protection
- Short-circuit protection
- Integrated, resettable AC breakers
Product Details
Freedom SW 150 A 12 V DC Input/240 V AC Output 3000 W Inverter/Charger (815-3012) by Xantrex®. The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models.
The 2nd generation 3000 W model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is ‘Generator Support Mode’ which enables the Freedom SW to supplement a generator¹ when AC loads exceed the generator’s capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milli2nds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.
Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output²