Xantrex® 815-2012 - Freedom SW 100 A 12 V DC Input/240 V AC Output 2000 W Inverter/Charger

0 reviews|Item # mpn1750932|Similar Products
$2,062.79
In Stock (51) - Ships in 24 to 48 hrs
Manufacturer
Have a Question? Ask a Specialist
888.453.5144Live Chat

Product Details

Freedom SW 100 A 12 V DC Input/240 V AC Output 2000 W Inverter/Charger (815-2012) by Xantrex®. The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models.

Specifications

Output Power (Continuous): 2000 W
Surge Power: 4000 W
Output Frequency Regulation: 60 Hz
Peak output current (Inverter): 55 A
Output Voltage: 120 V AC
Output Wave Form: True sine wave
Efficiency (Full Load): 90%
No-load power draw (inverting): 3 A DC
Input DC voltage range: 10-16 V DC
AC Connections: Single phase in/out
Output current (continuous at 25°C): 100 A
Output voltage: 12 V DC
Output voltage range: 5-16 V DC
Charge control: 3 stage with manual equalize
Charge temperature compensation: Remote battery sensor
Optmial Efficiency: > 85%
AC Input (Max. Charge): 0.98 typical
Input current (for maximum charging): 16 A rms nominal
Input AC voltage: 120 V AC
Input AC voltage range: 85 - 140 V AC
Dead battery charge: > 5 V DC
Compatible battery types: LiFePO4 / Flooded / gel / AGM
Transfer relay rating: 1 leg of 30 A
Transfer time (AC to inverter and inverter to AC): < 20 ms
Optimal Operating Temperature Range: - 4°F to 140°F (- 20°C to 60°C)
Storage ambient temperature range: - 40°F to 185°F (- 40°C to 85°C)
Net Weight: 60.5 lb (27.5 kg)
Unit Dimensions (H X W X L): 7.75" x 13.5" x 15.25" (197 x 343 x 387 mm)
Safety: ETL listed to CSA 107.1, UL458 and UL458 Marine Supplement (drip shield with product number 808-9004 required) ABYC E-11, A-31, A-32
EMC: CFR 47, FCC, PART 15, Subpart B, Class B and CAN ICES-3 (B) / NMB-3 (B)

Features

  • Pure sine wave output to operate sensitive electronics
  • Advanced configuration options for customized applications(A System Control Panel is required for all system configuration and setup)
  • Parallel and series stacking capability
  • Built-in transfer switch automatically transfers between inverter power and incoming AC power
  • Power factor corrected, multi-stage charger for fast, efficient charging
  • Temperature compensated charging for a variety of climate conditions
  • Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power(When used with the remote panel)
  • Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
  • Conformal coated circuit boards for humid environments
  • Ability to charge batteries drained to extremely low voltage
  • Compatible with the Xantrex Automatic Generator Start(Sold separately)
  • Battery over-voltage and under-voltage protection
  • Over-temperature shutdown
  • Automatic overload protection
  • Short-circuit protection
  • Integrated, resettable AC breakers

The 2nd generation 2000 W model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is ‘Generator Support Mode’ which enables the Freedom SW to supplement a generator¹ when AC loads exceed the generator’s capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milli2nds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.

Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output²

Xantrex Technology® is a world leader in the development, manufacturing and marketing of advanced power electronic products and systems for the mobile power markets. With more than three decades of design, engineering and manufacturing experience backed by Schneider Electric’s global infrastructure, Xantrex power solutions offer an enviable mix of advanced technology and unmatched bankability.

Brand:
Part Number:
815-2012
UPC:
715535897154
Alternate MPN:
8152012

Reviews

(0)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Xantrex® 815-2012 - Freedom SW 100 A 12 V DC Input/240 V AC Output 2000 W Inverter/Charger
/0

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
BOATiD FacebookBOATiD TwitterBOATiD YouTube ChannelBOATiD PinterestBOATiD Instagram
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by BOATiD.com is a product authorized by or in any way connected with any manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS