Product Details
Mold for Floating Dock Anchor by Techstar®. Convenient Anchor Mold can hold up to 3 bags of concrete mix, or about 250 pounds. Once set Anchor can be rolled into place. The molded hole in the center of the molds allows for the anchor chain to be looped through for an easy connection of your chain through the middle. Does not include chain or concrete mix.
Notes
- Dock builders can fill many forms in one cement delivery or one at a time on site with 3 x 30kg (66 pound) bags of cement.
Features
- After your cement is set, you can tip it up with a 2 x 4 or the handgrips conveniently located on the bottom at each side
- Once it is on its end, the anchor can be rolled to its destination
- The molded hole allows an easy connection of your chain through the middle
- 24" diameter x 10" high
- 10 pounds (Shipping Weight) (Before adding cement)
- Use with ANCB7
- Keeps your dock secure all season long
- Designed to hold about 250 pounds of concrete
- Weighs 14lbs empty and 250lbs once filled with concrete
Tommy Docks / TechStar - Floating Dock Anchor Mold (Dock System Float Drum) is designed to hold approximately 250 lbs. of concrete to help hold your dock in place. Utilizes Marine Grade Polyethylene as the shell. Mold design of the form allows the anchoring chain to attach through the center of the anchor. Eliminates the need to embed anchor chain directly into concrete. After your cement is set, you can tip it up with a 2 x 4 or the handgrips conveniently located on the bottom at each side. Once it is on its end, the anchor can be rolled to its destination. The molded hole allows an easy connection of your chain through the middle. 24" diameter x 10" high 10 pounds (Shipping Weight) (Before adding cement) Single.
Building Guide & Tips
Holds 3 bags of self-mix concrete
Fill entire opening to the top
After your cement is set, you can tip it up with a 2 x 4 or the hand grips conveniently located on the bottom at each side.
Once it is on its end, the anchor can be rolled to its destination.
Fasten chain through the center hole before attaching the other chain end to you dock using anchor brackets
Two forms on either end of the dock should cross once placed in the water, as shown in the image above
Adjust chain length according to the depth of your
Techstar® is a proud Canadian manufacturer located in Port Perry Ontario. Here at Techstar, Techstar have been moulding a wide range of material handling products, storage bins, commercial recycling stations and dock floats since 1978. Techstar business began in Scarborough Ontario in a warehouse of just 3,000 sq. ft, and with Techstar budding success over the following 10 years, Techstar purchased a factory in Port Perry Ontario. Now, over 40 years later, Techstar company has grown exponentially, and with the expansion of Techstar product lines, Techstar occupy just over 60,000 sq. ft at Techstar manufacturing facility.