Name: T-H Marine® - Atlas™ 10" Setback Black Hydraulic Jack Plate
Brand: T-H Marine
SKU: mpn4674287999
Price: 2297.23 USD
Availability: InStock
Rating: 4.4 (5 reviews)

Specifications

Setback	10"

Includes

Jack Plate
Relay Harness
Rocker Switch

Features

Rated for engines up to 300 HP or up to 625 pounds dry weight
Atlas™ is truly the best hydraulic jack plate in the world - Atlas™ is factory installed by more boat manufacturers than any other plate
Atlas™ is used by more Professional fisherman than any other hydraulic jack plate
Atlas™ is the #1 selling hydraulic plate in the world / sold & serviced by more outlets
Atlas™ hydraulic actuator is made in the U.S.A., the competition's is from China
Atlas™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate - the competition copied
Atlas™ is first plate to offer predrilling for shallow water anchers - the competition copied
Atlas™ is first and still only plate that does not require regular grease lubrication - the competion design cannot do that
Atlas™ is first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
Atlas™ is first plate to offer very simple actuator replacement in the field
Atlas™ was first major development in hydraulic jack plates in over a decade - spurring hydraulic jackplate improvement
Self Contained Hydraulic Pump System (No Reservoir or lines to install)
Fast! - Bottom to Top in Less than 8 Seconds
Rod and Slot Lifting Design - Trouble Free Lifting Action
Hi-Tech Engineered Polymer Rods - 6 Times More Abrasion Resistant than Steel
Easy Two-Pin Pump Removal - Quick Maintenance
Installs in Half the Time of Comparable Jack Plates
Stroke Length - 5 Inches
Height Adjustment Up to 7 Inches

Product Details

Atlas™ 10" Setback Black Hydraulic Jack Plate (AHJ-10V-B-DP) by T-H Marine®. T-H Marine's Atlas™ hydraulic jack plate is truly the next generation in jack plate design, built for the heaviest and most powerful outboard engines on the market today, even the big four strokes. The innovative high tech engineered polymer rod and slot lifting design guarantees trouble free action. This plate also features the newest concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and Self contained lifting action. This all new pump will lift the heaviest outboard from bottom to top in less than 8 2nds.

Installation

T-H Marine® - Atlas™ 10" Setback Black Hydraulic Jack Plate Installation Instructions

T-H Marine® - Atlas™ 10" Setback Black Hydraulic Jack Plate Installation Instructions T-H Marine® - 2022 Catalog Made In USA T-H Marine Authorized Dealer

Brand:

T-H Marine

Part Number:

AHJ-10V-B-DP

UPC:

733572096002

Alternate MPN:

AHJ10VBDP

Warranty

T-H Marine Supplies, Inc. warrants to the first retail purchaser of its products that T-H Marine Supplies, Inc. will replace or repair the product, at its sole discretion, if any defects in material or workmanship are reported within the applicable warranty periods set out below from the date of the first retail purchase, subject to the remedies, exclusions, and limitations in this limited warranty.

1-Year Warranty - CMC hydraulic jack plates, CMC Tilt & Trim units: Hydraulic Actuator mechanism
5-Year Warranty - CMC hydraulic jack plates, manual jack plates and CMC Tilt & Trim units: frame structure assembly
1-Year Warranty - All other CMC Marine, Inc. Products

Other Limitations:

Except as set forth herein, there are no other warranties, either express or implied, provided by T-H Marine Supplies, Inc. on this product. All other warranties, express or implied, including implied warranties of fitness and merchantability, are expressly excluded. T-H Marine Supplies, Inc. further disclaims any liability for economic loss arising from claims of product failure, negligence, defective design, manufacturing defect, failure to warn and/or instruct, lack of seaworthiness, and any other theory of liability not expressly covered under the terms of this limited warranty.

To the extent required by law any implied warranty is limited to the duration of the respective express limited warranties stated herein. To the extent allowed by law neither T-H Marine Supplies, Inc., nor the selling distributor, nor the selling retailer shall have any responsibility for loss of use of the product or the boat, loss of time, inconvenience, commercial loss or incidental and consequential damages. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not be applicable. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not be applicable. This warranty gives the owner specific legal rights, and the owner may also have other rights which vary from state to state.

Sole Remedy:

In no event shall any repair or replacement under this limited warranty exceed the fair market value of the product as of the date of the owner’s claim. The remedy of repair or replacement of parts or materials found to be defective in factory materials or workmanship covered by this limited warranty shall constitute the owner’s sole and exclusive remedy against T-H Marine Supplies, Inc. for any claims whatsoever of economic loss resulting from product failure.

Acceptance of any product returned or any refund provided by T-H Marine Supplies, Inc. shall not be deemed an admission that the product is defective. Products that are replaced become T-H Marine Supplies, Inc.’s property. The terms and conditions contained in this limited warranty may not be modified, altered or waived by any action, inaction, or representations, whether oral or in writing, except upon the express, written authority of a management level employee of T-H Marine Supplies, Inc.

Exclusions:

This limited warranty does not apply to the following items:

Any T-H Marine Supplies, Inc. products used in other applications than on pleasure boats, including but not limited to non-marine use or use on boats which are utilized for racing or commercial purposes.
Ancillary equipment used or associated with T-H Marine Supplies, Inc. products, including but not limited to, batteries, fuses, switches, wiring, electric light bulbs, lamps, or sealed beam units.
Any product damaged by accident, acts of nature, improper installation, unreasonable or improper use, lack of proper maintenance, unauthorized repairs or modifications, abuse, normal wear or tear, or other causes not arising from defects in materials or workmanship.
Any expenses involved in the removal, reinstallation, or transportation of the product.
Any product damaged by the failure of the owner to use, maintain, or store the product as specified in any instructions.
Any product with discoloration or failure due to solar or chemical exposure.
Any defect or repair requiring redesign of the T-H Marine Supplies, Inc. product, except pursuant to the recall provisions of the United States Federal Boat Safety Act of 1971 or the recall laws of any other foreign jurisdiction.

Reviews

(5)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

1-5 of 5 Reviews

Sort by

4 of 5

2x the Replacement

It works very well, but this is the second time in 3 years to have to replace this item.

T-H Marine® - Replacement Wiring Harness

Posted by Customer / June 30, 2020

5 of 5

Totally Satisfied

Perfect.

T-H Marine® - Hydraulic Actuator

Posted by Floyd (Mcalester, OK) / March 16, 2018

5 of 5

Great Product

The Hi Jacker Jack plate looks awesome on the back of the poontoon...heavy duty aluminum really stands out, with multiple holes installation was so easy. Wish I had of put one on my bass boat way back when. Recommend this product.

Posted by Jimmy (Corsicana, TX) / November 08, 2017

5 of 5

Boat Motor Lift

Perfect replacement part, easy to install!

T-H Marine® - Hydraulic Actuator

Posted by David (Colorado Springs, CO) / April 01, 2017

3 of 5

Heavy Duty, Very Well Made

Great product, looks and performs as described. Keep in mind that engine rigging will be extended 10 inches so you may have to replace battery cables and Verado steering hoses in order to reach, also make sure the boat harnesses have enough slack to reach the extra foot of distance. Once installed the bracket looks great, performs flawlessly.

Posted by Roland (Panama City Beach, FL) / May 27, 2016

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!