Carefully crafted to suit your specific boating needs
Engineered to high standards
High-grade design delivers extended lifespan
Product Details
Back Plate Kit for SeaStar Helms by SeaStar Solutions®. The Backplate Kit (HA5418) reduces SeaStar helm protrusion from the front by the thickness of the dash and allows clean retrofit of SeaStar helm where following helms were previously installed: pre-1991 SeaStar, SyTen, or mechanical rotary steering. Not for BayStar. This will cover the old holes and provide extra dash rigidity.
Chances are when you take the helm, put your boat in gear and ease out of your slip, you can thank SeaStar Solutions. When you're running at wide-open throttle and have to execute a turn, you can thank SeaStar Solutions. When you can do it all day and still feel relaxed and in command as you head for home, you can thank SeaStar Solutions.
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-1 of 1 Reviews
2 of 5
1" Play at Outdrive
Pushing the sterndrive by hand at back of boat, there is 1" side to side play on drive. Tiller inside is not loose. Cable tube and swivel block do not move. Cable goes in and out at tube, allowing the back and forth on stem drive movement, but wheel is motionless and no feedback felt.. How much play should there be on a 4.2 ratio nfb rotary clutch? If this can be fixed my rating climbs from so-so to super!
Seastar Solutions® SH4910 - NFB™ Single Rear Mount Rotary Helm
Posted by Customer / July 18, 2020
Questions and Answers
(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!