2" Setback Model 220 Fixed Jack Plate (550220) by Panther®. This cast aluminum spacer provides two inches of set-back for bolt-on motors, allowing performance seekers to fine tune their boats. Dipped in a zinc rich primer then powder coated, this solid spacer installs directly to the transom, or adds additional set-back to an existing JackPlate. A standard BIA hole pattern makes mounting a snap, but is drillable for non-standard patterns.
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-9 of 9 Reviews
5 of 5
Perfect!!
Have a 50hp motor w/out power trim and tilt - really runs great, but the "tilt assist" stopped assisting. The cylinder alone cost about 2/3s of one these, so decided to give this a go. Got it hooked up last night, and it's flawless. I really wanted to be able to trim the boat on longer runs fishing, so should be smoother and dryer now.
Other than the fiber block having to be modified to allow me to mount my 4hp Merc outboard (it was too thick), the plate worked out great. I needed to raise the outboard to get above the transom corner on my new boat, and it worked perfectly.
Panther® 550405 - Model 405 Fixed Motor Mount Plate
Posted by Customer / August 12, 2020
5 of 5
Excellent, Excellent Product
It has been over a year and it works absolutely flawless, excellent product, you will not regret it, very durable.
Bought the Panther 55 for a pontoon boat and am very pleased. It is a well made product, it was very easy to install and works well. Expensive, but I feel it is worth it.
Panther trim and tilt works great. Easy to install on a 1986 Lowe 17 commander didn't have to drill at all. Great service from BOATiD. Delivered right on time.
The bracket is well built. I wanted something a little more stout to carry the motor during trailering (not recommend by manufacturer). This bracket was rated at over 230lbs and easily holds my Mercury 9.9 xl 4 stroke. It provides just the right amount of tension to easily raise and lower the motor. I mounted it in such a way that the motor can be secured to the transom during the trailering to alleviate stress on the bracket. So far I am very happy with the bracket. I hope to give it the sea trials in a few weeks.