Panther® - Model 405 Fixed Motor Mount Plate

9 reviews|Item # mpn4933938403
Authorized Dealer
$298.61
In Stock (11) - Ships Tomorrow 06.10.26
See similar products
Have a Question? Ask a Specialist
888-453-5144Live Chat

Features

  • Built to match your exact requirements
  • High quality you can rely on
  • Expertly made from premium materials

Product Details

Model 405 Fixed Motor Mount Plate (550405) by Panther®. For Outboards Up to 35 hp or 263 lbs. If trolling motors are you thing - then Panther 405 static Plate is a must. It offers a sturdy and flat mounting area for your trolling motor clamps. Troll with confidence knowing that your trolling motor will stay where you put it!! This bracket makes mounting auxiliary and long shaft motors a snap.

When direct to transom motor mounting is difficult, Panther's Static Motor Mount Plate provides a flat secure mounting surface for clamp on or bolt on kicker motors two or four stroke up to 35 hp or 263 lbs. Made of solid cast aluminum with an 8 in. by 7 in. mounting area. The bracket can be used on most contoured boat transoms. The plate also works for mounting long shaft motors on short shaft transoms, because the plate set the motor 4 inches higher on the transom it's perfect for jon boats and small fishing boats when a short shaft motor would otherwise be required. Convenient economical durable and easy to install, the Model 55-0405 is the answer to difficult transom installations.

Panther® - 2020 CatalogPanther Authorized Dealer
Brand:
Panther
Part Number:
550405
UPC:
836125000409

Reviews

(9)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-9 of 9 Reviews
4 of 5
Great Product
Other than the fiber block having to be modified to allow me to mount my 4hp Merc outboard (it was too thick), the plate worked out great. I needed to raise the outboard to get above the transom corner on my new boat, and it worked perfectly.
Panther® 550405 - Model 405 Fixed Motor Mount Plate
Posted by Customer / August 12, 2020
5 of 5
Perfect!!
Have a 50hp motor w/out power trim and tilt - really runs great, but the "tilt assist" stopped assisting. The cylinder alone cost about 2/3s of one these, so decided to give this a go. Got it hooked up last night, and it's flawless. I really wanted to be able to trim the boat on longer runs fishing, so should be smoother and dryer now.
Posted by Customer / March 05, 2021
5 of 5
Excellent, Excellent Product
It has been over a year and it works absolutely flawless, excellent product, you will not regret it, very durable.
Posted by Vesly (Seattle, WA) / July 29, 2020
5 of 5
Excellent Product
Bought the Panther 55 for a pontoon boat and am very pleased. It is a well made product, it was very easy to install and works well. Expensive, but I feel it is worth it.
Posted by Customer / July 11, 2020
5 of 5
Time to Fish
Panther trim and tilt works great. Easy to install on a 1986 Lowe 17 commander didn't have to drill at all. Great service from BOATiD. Delivered right on time.
Posted by Charles (Princeton, WV) / March 25, 2020
5 of 5
Great Product
This works great, fast shipping, very well built and looks great, perfect.
Panther® 55-0030 - 9-3/4" Setback Powder Coated Aluminum Adjustable Motor Bracket
Posted by Ronald (Ferndale, CA) / September 14, 2019
3 of 5
Nice but
Did not come with any mounting screws.
Panther® 55-0030 - 9-3/4" Setback Powder Coated Aluminum Adjustable Motor Bracket
Posted by Scott (Sadler, TX) / April 20, 2019
5 of 5
Great Bracket
The bracket is well built. I wanted something a little more stout to carry the motor during trailering (not recommend by manufacturer). This bracket was rated at over 230lbs and easily holds my Mercury 9.9 xl 4 stroke. It provides just the right amount of tension to easily raise and lower the motor. I mounted it in such a way that the motor can be secured to the transom during the trailering to alleviate stress on the bracket. So far I am very happy with the bracket. I hope to give it the sea trials in a few weeks.
Posted by Mike (Kingston, NH) / April 04, 2019
5 of 5
Strong And Very Well Made.
This bracket is very stout. The finish is very nice.
Posted by Michael (Weston, CT) / February 28, 2018

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!