Specifications
| Display Size | |
|---|---|
| Display Resolution | |
| Display Brightness | |
| Contrast Ratio | |
| LCD Color | |
| Viewing Angle | |
| USB Ports | |
| Ethernet Ports | |
| Controller Area Network (CAN) Ports | |
| Operating Voltage (Dedicated Supply Connection) | |
| Power Consumption (Dedicated Supply Connection) | |
| Operating Voltage (NMEA 2000® Connection) | |
| Power Consumption (NMEA 2000® Connection) | |
| Load Equivalence Number (LEN) | |
| Reverse Battery Protection (NMEA 2000® Connection) | |
| Load Dump Protection (NMEA 2000® Connection) | |
| Overall Dimensions (DxWxH) | |
| Weight | |
| Front Panel Material | |
| Front Panel Controls | |
| Mounting | |
| Operating Temperature | |
| Storage Temperature | |
| IP Rating |
Features
- 8" TFT LCD panel, LED backlit
- Widescreen aspect ratio 5:3
- 800 x 480 pixels
- 1350 nits brightness (optically bonded)
- Solid state disk drive
- Fanless cooling system
- Flush or VESA mounting
- Dual CAN Bus for single or redundant NMEA 2000® Network Connections
Product Details
8" Vessel Monitoring and Control Display with Direct NMEA 2000 Connection by Maretron®. The TSM810C is an 8" dedicated touchscreen that includes Maretron’s N2KView® vessel monitoring and control software. The N2KView® software allows you to configure as many favorite screens as you want with exactly the information you want to see. The TSM810C provides an extremely simple touch interface for monitoring and controlling critical systems from anywhere on the vessel.The TSM810C is ruggedized for marine use and includes a solid state disk drive to withstand the pounding associated with waves. And since the TSM810C only dissipates 10 watts, there is no need for internal cooling fans that are noisy and wear out causing electronics to overheat and fail. The TSM810C can be mounted outside given the high bright screen and water-proof front.As an alternative to controlling the TSM810C through the touchscreen, the TSM810C includes two USB ports for connecting keyboards, mice, or track-balls. The TSM810C also has an Ethernet port for connecting Internet Protocol (IP) cameras for viewing within the N2KView® software. Lastly, the TSM810C contains two completely isolated CAN bus connectors (M12) for easy connection to single or redundant NMEA 2000® networks.