Faria Beede Instruments® - Dress Series 2.06" White Dial/White Aluminum Bezel In-Dash Mount Digital Hourmeter Gauge

3 reviews|Item # mpn4795347990
Authorized Dealer
$109.59
In Stock (17) - Ships Tomorrow 06.10.26
See similar products
Have a Question? Ask a Specialist
888-453-5144Live Chat

Specifications

Operating Temperature
-4°F to +158°F (-20°C to +70°C)
Storage Temperature
-22°F to +185°F (-30°C to +85°C)
Operating Voltage
11.5 to 16 volts
Nominal Voltage
14.2 volts
Current Consumption
< 100 mA, without illumination
Mounting Bracket
Mounting clamp. Clamping range 0 -.8” (0-20 mm)
Torque
5 to 7 inch pounds (.57 - .80 Nm)
Mounting Hole
2-1/16" (53 mm) for 2" Instrument

Features

  • Engineered to high standards
  • High-grade design delivers extended lifespan
  • Made with premium materials

Product Details

Dress Series 2.06" White Dial/White Aluminum Bezel In-Dash Mount Digital Hourmeter Gauge (13130) by Faria Beede Instruments®. Measurement Limit: 10 000 hrs, 12-32 V DC. Perimeter-lighted white dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Hourmeter operates by applying battery voltage across the gauges's register motor to ground. The register increments increase when the key switch in on. Route power through a normally open Oil Pressure switch to count "engine running" hours.

Installation

Faria Beede Instruments® - Dress Series 2.06" White Dial/White Aluminum Bezel In-Dash Mount Digital Hourmeter Gauge Installation Instructions
Faria Beede Instruments® - Dress Series 2.06" White Dial/White Aluminum Bezel In-Dash Mount Digital Hourmeter Gauge Installation InstructionsFaria Beede Instruments® - CatalogMade In USAFaria Beede Instruments Authorized Dealer
Brand:
Faria Beede Instruments
Part Number:
13130
UPC:
759266131309

Reviews

(3)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-3 of 3 Reviews
5 of 5
G3 Angler V16
Factory didn’t install one and this was as close of a match I could find to my factory gauges. Works and will help me with proper maintenance. FB has great support and made in United States
Faria Beede Instruments® 19020 - Kronos 2" Spun Aluminum Dial/Polished Stainless Steel Bezel In-Dash Mount Hourmeter Gauge
Posted by David / August 31, 2020
5 of 5
G3 Angler V16
Factory didn’t install one and this was as close of a match I could find to my factory gauges. Works and will help me with proper maintenance. FB has great support and made in United States.
Faria Beede Instruments® 19020 - Kronos 2" Spun Aluminum Dial/Polished Stainless Steel Bezel In-Dash Mount Hourmeter Gauge
Posted by David / August 31, 2020
4 of 5
Disappointing Quality
I purchased a set of these about a year ago, 2 taches with hourmeters and 2 multi-function gauges for a twin diesel powered boat. The original Faria gauges had lasted for a decade plus. These were part of a helm facelift. The first tach quit at about 3 months. Faria replaced it under warranty with a new unit, quickly I might add, but the hourmeter was at zero and now the elapsed time is off between the engines. Now, at the one year mark, one of the multi gauges is out (the fuel function is inop). I am also out the cost to ship both of these back for warranty replacement. Thankfully, they have a 3 year warranty. My problem is that I've experienced a 50% failure rate in a year. Not too keen on this as I could lose engine telemetry in the middle of a trip. Also, they have now discontinued this line of gauges so I have purchased one spare of each as I do not trust them from a reliability standpoint. Not pleased with the quality of their product anymore based upon this experience!
Faria Beede Instruments® 43006 - 4" Black In-Dash Mount Heavy-Duty Multifunction Gauge
Posted by Michael (Kemah, TX) / October 29, 2019

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!