Faria Beede Instruments® 12913 - Euro Series 2.06" White Dial/Black Aluminum Bezel In-Dash Mount Hourmeter Gauge

5 reviews|Item # mpn4795348655
Authorized Dealer
$127.01
In Stock (19) - Ships Tomorrow 06.10.26
See similar products
Have a Question? Ask a Specialist
888-453-5144Live Chat

Specifications

Operating Temperature
-4°F to +158°F (-20°C to +70°C)
Storage Temperature
-22°F to +185°F (-30°C to +85°C)
Operating Voltage
11.5 to 16 volts
Nominal Voltage
14.2 volts
Current Consumption
< 100 mA, without illumination
Mounting Bracket
Mounting clamp. Clamping range 0 -.8” (0-20 mm)
Torque
5 to 7 inch pounds (.57 - .80 Nm)
Mounting Hole
2-1/16" (53 mm) for 2" Instrument

Features

  • Engineered to high standards
  • High-grade design delivers extended lifespan
  • Made with premium materials

Product Details

Euro Series 2.06" White Dial/Black Aluminum Bezel In-Dash Mount Hourmeter Gauge (12913) by Faria Beede Instruments®. Measurement Limit: 10 000 hrs, 12-32 V DC. Perimeter-lighted white dial with bold black graphics, black aluminum bezel, contoured white pointer, and flat glass lens. Hourmeter operates by applying battery voltage across the gauges's register motor to ground. The register increments increase when the key switch in on. Route power through a normally open Oil Pressure switch to count "engine running" hours.

Faria Beede Instruments® - CatalogMade In USAFaria Beede Instruments Authorized Dealer
Brand:
Faria Beede Instruments
Part Number:
12913
UPC:
759266129139

Reviews

(5)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-5 of 5 Reviews
5 of 5
Great GPS Speedo
I installed this gps speedometer on my boat earlier this year. Install was not too difficult and it looks and works flawlessly. Extremely accurate and reliable. Better than the old pito tube that it replaced. Would recommend.
Faria Beede Instruments® 32816 - Euro 4" Black Dial/Black Aluminum Bezel In-Dash Mount GPS Speedometer Gauge
Posted by Customer / June 12, 2021
2 of 5
Faria Water Pressure Gauge
The gauge is satisfactory. There is only one fitting so I had to pay 20.00 for another fitting to go in my outboard. My biggest complaint is the kit only came with about 14 of tubing so it wouldn't reach the dashboard. I had to go buy refrigerator tubing and two more barbbed fittings to reach the gauge from the engine. Called the seller and the kid that answered the phone had no clue, so I hung up and went to buy the needed parts. I would buy a different brand.
Faria Beede Instruments® 12810 - Euro 2" Black Dial/Black Aluminum Bezel In-Dash Mount Water Pressure Gauge
Posted by Michael (Wilmington, DE) / October 07, 2019
5 of 5
G3 Angler V16
Factory didn’t install one and this was as close of a match I could find to my factory gauges. Works and will help me with proper maintenance. FB has great support and made in United States
Faria Beede Instruments® 19020 - Kronos 2" Spun Aluminum Dial/Polished Stainless Steel Bezel In-Dash Mount Hourmeter Gauge
Posted by David / August 31, 2020
5 of 5
G3 Angler V16
Factory didn’t install one and this was as close of a match I could find to my factory gauges. Works and will help me with proper maintenance. FB has great support and made in United States.
Faria Beede Instruments® 19020 - Kronos 2" Spun Aluminum Dial/Polished Stainless Steel Bezel In-Dash Mount Hourmeter Gauge
Posted by David / August 31, 2020
4 of 5
Disappointing Quality
I purchased a set of these about a year ago, 2 taches with hourmeters and 2 multi-function gauges for a twin diesel powered boat. The original Faria gauges had lasted for a decade plus. These were part of a helm facelift. The first tach quit at about 3 months. Faria replaced it under warranty with a new unit, quickly I might add, but the hourmeter was at zero and now the elapsed time is off between the engines. Now, at the one year mark, one of the multi gauges is out (the fuel function is inop). I am also out the cost to ship both of these back for warranty replacement. Thankfully, they have a 3 year warranty. My problem is that I've experienced a 50% failure rate in a year. Not too keen on this as I could lose engine telemetry in the middle of a trip. Also, they have now discontinued this line of gauges so I have purchased one spare of each as I do not trust them from a reliability standpoint. Not pleased with the quality of their product anymore based upon this experience!
Faria Beede Instruments® 43006 - 4" Black In-Dash Mount Heavy-Duty Multifunction Gauge
Posted by Michael (Kemah, TX) / October 29, 2019

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!