Product Details
L-Series Solenoid (9012) by Blue Sea Systems®. Contact Voltage: 800V DC. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.
Specifications
| Control Circuit Voltage: 9-36V DC (12/24V nominal) |
| Contact Voltage: 800V DC |
| Amperage Operating Current continuous: 0.13A @ 12 V / 0.07A @ 24 V |
| Amperage Operating Current when changing state: 3.6A |
| Terminal Stud: M8 (accepts 5/16" terminals) |
| Terminal Stud Torque: 90 in-lb (10.17 Nm) max |
| Continuous Rating: 250A / 300A / 400A / 450A |
| Intermittent Rating: 275A (5 min) / 400A (5 min) / 500A (5 min) / 600A (5 min) |
| Cranking Rating 30 sec: 1,000A |
| Contact Form: SPST-NO |
| Inrush Rating: 0.25 sec (10 repeats): 2000A |
| Mounting Screw: #10 or M5 |
| Stud Material: Stainless Steel |
| Terminal Stud Length: 0.66in (16.76 mm) |
| Control Circuit Connection: 20 AWG Tinned Wire |
| Weight: 1.00lb (0.45 kg) |
Features
- Continous duty, SPST - Normally Open
- Hermetically sealed contacts / vaporproof
- Ignition protected - safe for installation aboard gasoline powered boats
- 450 Amp Class
- Activated by a low amperage ON-OFF switch mounted anywhere
- Coil control circuit minimizes heating and amperage draw
- No external coil suppression required
Regulatory Specifications
CE Marked - The CE marking is applied to products regulated by certain European health, safety and environmental protection legislation. The CE marking is obligatory for products it applies to. The manufacturer affixes the marking certifying that the product conforms to applicable regulations, in order to be allowed to sell the product in the European market.
Ignition Protected
IP67 - Dust tight. No Ingress of dust. Two to eight hours. Protection against the effects of immersion in water between 15cm and 1m for 30 minutes.
SAE J1171 - Ignition Protected
UL 508 - UL Designations Explained
Blue Sea Systems® engineers and manufactures electrical products for harsh environments in the marine, industrial, and heavy truck industries. Their engineered products are created by an in-house team of engineers who have experience in mechanical, electrical, industrial, electronic, and software design. Extensive testing is performed on all products. Blue Sea Systems` in-house lab is used to load test, thermal test, and water test products to ensure they will perform under marine conditions. Blue Sea Systems delivers innovative, reliable products for the marine industry.