Product Details
BatteryLink™ Automatic Charging Relay by Blue Sea Systems®. Automatically shares single source of charge with Auxiliary BatteryFeatures Optional Features. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.
Specifications
| Nominal Voltage: 12V DC / 24V DC |
| Auxiliary Battery Priority: Yes |
| Amperage Operating Current: 175mA @ 12V (Combine) / 115mA @ 24V (Combine) / 15mA (Open) |
| Continuous Rating: 120A |
| Intermittent Rating: 210A (5 min) |
| Maximum Cable Size: 1/0 AWG |
| Maximum Torque: 140 in-lb (15.82 Nm) |
| Stud Material: Tinned Copper |
| Terminal Stud Size: 3/8" - 16 (M10) |
| Relay Contact Position: SPEC_HEADER |
| Combine 30 sec: 13.6V @ 12V / 27.2V @ 24V |
| Combine 2 Min: 13.0V @ 12V DC / 26.0V @ 24V DC |
| Over Voltage Lockout: 16.0V @ 12 V / 32.0V @ 24 V |
| Open Low: 12.25V @ 12V / 24.5V @ 24V |
| Auxiliary Priority: SPEC_HEADER |
| Weight: 1.25lb (0.57 kg) |
Features
- 120 Amp continuous rating
- 12/24V DC auto ranging voltage input
- Senses charging on two battery banks
- Side and bottom knockouts for cable connections
- Clip-on cover insulates terminal connections
- 7∕8" (22 mm) stud length to accept multiple cable terminals
- Integrated LED indicates ACR status
- 1∕4" × . 032" male quick connect terminals for ground and optional features
- Largest battery bank cannot exceed Group 27
- Optional Auxiliary Battery Priority connection shares the alternator charge with the Auxiliary battery longer when the engine is running to allow the use of auxiliary loads for an extended period of time
- Remote LED remotely indicates ACR states - requires optional LED
Regulatory Specifications
CE Marked - The CE marking is applied to products regulated by certain European health, safety and environmental protection legislation. The CE marking is obligatory for products it applies to. The manufacturer affixes the marking certifying that the product conforms to applicable regulations, in order to be allowed to sell the product in the European market.
Ignition Protected
IP67 - Dust tight. No Ingress of dust. Two to eight hours. Protection against the effects of immersion in water between 15cm and 1m for 30 minutes.
ISO 8846
SAE J1171 - Ignition Protected
Blue Sea Systems® engineers and manufactures electrical products for harsh environments in the marine, industrial, and heavy truck industries. Their engineered products are created by an in-house team of engineers who have experience in mechanical, electrical, industrial, electronic, and software design. Extensive testing is performed on all products. Blue Sea Systems` in-house lab is used to load test, thermal test, and water test products to ensure they will perform under marine conditions. Blue Sea Systems delivers innovative, reliable products for the marine industry.