Bennett Marine® - Performance Sport Hydraulic Trim Tab Kit with Rocker Switch, Pair

6 reviews|Item # mpn2299006
Manufacturer
$1,146.52
In Stock (2)
Have a Question? Ask a Specialist
888-453-5144Live Chat

Specifications

Recommended boat length
15' - 21'
Dimensions
12" L x 9" W
Supply Voltage
12/24 V

Includes

  • 1 x Control unit
  • 2 x Trim plane assemblies
  • 2 x Hydraulic actuators
  • 1 x Hydraulic power unit (V351 HPU1)
  • 1 x Hydraulic tubing and hardware

Features

  • Get on plane fast, and stay on plane at intermediate speeds
  • Correct listing and uneven loads
  • Reduce pounding and eliminate porpoising
  • Increase speed
  • Improve visibility and safety
  • Improve fuel efficiency
  • Precise and accurate control
  • Low maintenance with long-term value
  • Easy to service

Product Details

Performance Sport Hydraulic Trim Tab Kit with Rocker Switch, Pair (ST9) by Bennett Marine®. The Sport Tab series is engineered for the demands of offshore attitude correction over a wide range of water conditions. For speeds up to 60 mph. Features two heavy duty stainless steel tabs with powder-coated black finish, secured with heavy duty mounting plates and fasteners.

Installation

Bennett Marine® - What to Expect for InstallationBennett Marine® - What to Expect for Installation

Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly. Bennett Standard Trim Tab KIt's are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. KIt's are complete with all the necessary components for installation.

Part Number:
ST9
UPC:
666285116005
Alternate MPN:
BENST9

Reviews

(6)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-6 of 6 Reviews
5 of 5
Trim Tabs
Easy install and not a bad look either. Now to try them out. I installed them on a 15ft boat that is a little stern heavy so this should help with bringing the bow down.
Posted by Sean (Atlantic Beach, NC) / August 20, 2019
5 of 5
Great Customer Service
Frankly, I was not even aware that there was a warranty on my actuator! I called Bennett for help finding a model number so that I could order the proper part. After a pleasant, short conversation, I was instructed to send my actuator to them. Within a week they had me back on the water providing a new replacement actuator at no charge. I live in Florida and am around boats quite a bit, it is a pleasure to deal with companies like Bennett, Yamaha and PowerPole all of whom have great products and excellent customer service. Thanks again. Don Q. Tarpon Springs, FL.
Posted by Customer / June 30, 2021
5 of 5
Actuator
Received the Bennett Actuator and installed, works great. No problems with the item and performs well.
Posted by Customer / July 21, 2020
2 of 5
Pump Repair
Well, after studying the wiring schematic I discovered why the pump was operating strangely. I had somehow attached the hot lead to the "red" circuit on the switch which allowed one actuator to operate correctly but the other side would operate both actuators. I correct the wiring and everything works correctly and for once every accessory operates correctly on my big boat. I did need the part as the old one operated intermittently. Thanks!
Posted by Scott (Fort Pierce, FL) / June 18, 2019
5 of 5
Easy Install
This was the easiest install, i did not have any problems with it.
Posted by Dana (Pasadena, MD) / April 24, 2019
4 of 5
Measure Carefully
I called Bennett tech support prior to ordering the SLT10 to determine it they would fit on my Key West 186. I was advised they would with no issues. When I went to install them they would not fit unless I cut into the swim platform. Not wanting to do so I returned them. Very disappointed, I really wanted them. I settled with using a hydrofoil which would help a little with the porpoising issue.
Posted by Joseph (Saint Johns, FL) / August 20, 2018

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!