Bennett Marine® - Performance Sport 60 lb Self-Leveling Trim Tab w/o Switch, Pair

6 reviews|Item # mpn2298894
Manufacturer
$199.35
In Stock (7)
Have a Question? Ask a Specialist
888-453-5144Live Chat

Specifications

Actuation force
60 lb
Recommended boat length
10' - 16'
Dimensions
6" L x 8" W

Includes

  • 2 x 14 gauge stainless steel tabs with Bennett's exclusive interlocking hinge
  • 2 x Strong, durable actuators

Features

  • Get on plane faster
  • Plane at lower speeds
  • Improve your fuel efficiency
  • Affordable
  • Installed in Under an Hour
  • Durable Spring-Action System
  • Eliminate porpoising and chine walking
  • Improve your hole shot
  • Reduce engine laboring and improve fuel efficiency
  • All stainless steel hardware – no plastic!

Product Details

Performance Sport 60 lb Self-Leveling Trim Tab without Switch, Pair (SLT6) by Bennett Marine®. Even small boats need trim tabs! Now you can enjoy the durability of Bennett trim tabs in a quick and easy, transom-only trim tab system. There are no hydraulics needed – simply mount the two actuators and trim tabs and you're on your way to a smoother ride. A simple, durable, and affordable trimming solution for smaller boats. Quick and easy installation with nothing to do inside the boat – just mount the actuators and trim tabs on the transom and enjoy the benefits.

Installation

Bennett Marine® - What to Expect for InstallationBennett Marine® - What to Expect for Installation

The SLT reacts instantly to boat speed and water pressure by adding trim when it's needed. At slower speeds, when the boat is trying to get on plane, the actuators hold the trim tabs down, which lifts the stern and simultaneously puts the boat at planing attitude. On plane, and as the boat's speed increases, water pressure pushes the tabs up. You will enjoy a smoother ride while the SLT does all the work.

Part Number:
SLT6
UPC:
666285146705
Alternate MPN:
BENSLT6

Reviews

(6)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-6 of 6 Reviews
5 of 5
Trim Tabs
Easy install and not a bad look either. Now to try them out. I installed them on a 15ft boat that is a little stern heavy so this should help with bringing the bow down.
Bennett Marine® SLT6 - Performance Sport Series 60 lb Self Leveling Trim Tab w/o Switch, Pair
Posted by Sean (Atlantic Beach, NC) / August 20, 2019
5 of 5
Great Customer Service
Frankly, I was not even aware that there was a warranty on my actuator! I called Bennett for help finding a model number so that I could order the proper part. After a pleasant, short conversation, I was instructed to send my actuator to them. Within a week they had me back on the water providing a new replacement actuator at no charge. I live in Florida and am around boats quite a bit, it is a pleasure to deal with companies like Bennett, Yamaha and PowerPole all of whom have great products and excellent customer service. Thanks again. Don Q. Tarpon Springs, FL.
Posted by Customer / June 30, 2021
5 of 5
Actuator
Received the Bennett Actuator and installed, works great. No problems with the item and performs well.
Posted by Customer / July 21, 2020
2 of 5
Pump Repair
Well, after studying the wiring schematic I discovered why the pump was operating strangely. I had somehow attached the hot lead to the "red" circuit on the switch which allowed one actuator to operate correctly but the other side would operate both actuators. I correct the wiring and everything works correctly and for once every accessory operates correctly on my big boat. I did need the part as the old one operated intermittently. Thanks!
Posted by Scott (Fort Pierce, FL) / June 18, 2019
5 of 5
Easy Install
This was the easiest install, i did not have any problems with it.
Posted by Dana (Pasadena, MD) / April 24, 2019
4 of 5
Measure Carefully
I called Bennett tech support prior to ordering the SLT10 to determine it they would fit on my Key West 186. I was advised they would with no issues. When I went to install them they would not fit unless I cut into the swim platform. Not wanting to do so I returned them. Very disappointed, I really wanted them. I settled with using a hydrofoil which would help a little with the porpoising issue.
Posted by Joseph (Saint Johns, FL) / August 20, 2018

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!