Product Details
RIB Base by Navisafe®. The Navimount RIB is designed to fix the Navilight Tricolor as bicolor sidelight to the bow of an inflatable boat. It is supplied with a "3M VHB" self-adhesive sticker, working on boats made from Hypalon, Polyethylene or PVC. Mounting a Navigation light to an inflatable boat has never been this easy before!
Notes
- Navilight models 041 and 341 do not require additional converters and can be mounted directly
- Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960
Specifications
| Length: 120 mm |
| Width: 81 mm |
| Height: 37 mm |
| Weight: 102 g |
Features
- Floats light facing up
- Submersible to 20 m / 66 ft.
- Corrosion resistant
- Powered by three AAA batteries (not included)
CLEAN-PEEL-STICK: The “3M VHB” self adhesive sticker works on boats made from Hypalon, Polyethylene or PVC. We recommend the following instructions to obtain optimum adhesion:
Mark the area where you want to mount the Navimount RIB with a pencil or tape – once the Navimount RIB is mounted it will be very difficult to remove or reposition
Carefully clean the surface of the inflated boat where you want to mount the Navimount RIB with a proper cleaning solvent
Wait until the surface is dry
Peel the paper from the 3M VHB
Position the Navimount RIB exactly to the marked area
Bond strength is dependent upon amount of adhesive-to-surface contact – therefore press firmly starting at the center with your fingers and apply if possible a weight until its perfectly bonded. NOTE: At room temperature app. 50% of the ultimate strengh will be achieved after 20 minutes, 90% after 24hrs and 100% after 72hrs
Navisafe® are a specialist Norwegian lighting company that was founded in 2005 following a near-miss accident involving two boats without lights. It was a dark night and Jo Engebrigtsen (owner and founder of Navisafe) and his family were heading back to their summerhouse in a small boat with just a regular flashlight they had used for years. Suddenly a big day cruiser without lights "came from nowhere". Jo had just a second to avoid his boat and family being hit by the bigger boat. Relieved that an accident had been averted, Jo Engebrigtsen knew that only luck stopped him from becoming one of the victims of a serious boating accident. Jo also recognized that while in the dark it is difficult to see another boat and even more difficult to see a person in the water. What was needed therefore was a lantern with 360° illumination that was fully waterproof, robust, compact, lightweight and that could be effectively fitted on a jacket or a cap. It had to be small enough to put in your pocket to make sure you always can reach it, on a boat or in the water, yet bright enough to act as a professional boat lantern. Finally, it has to be very easy to use, with both a strong steady light and an ultra bright emergency flash... And so, the idea for Navi light 360° was born.