Product Details
1-1/4" x 3-1/2" Push Release Quick-Release Mount (JR-500) by Johnny Ray®. Push Button Release Top with Automatic 360° Ratchet Rotating, 45 Positioning Locks. Unique Swivel Mounts feature simple, one-handed operation which securely holds your unit in place, no matter what the boating condition is. No clumsy knobs to tighten, or multiple joints to move. Plus they keep your Electronic Unit close to the boat, not out on a limb where vibration and rough water can make viewing your unit virtually impossible.
Specifications
| Model: JR-500 |
| Shaft Diameter: .875" |
| Mounting Area: 4.0" Square |
| Top Removal Type: Push-Button |
| Maximum Weight: 7 lbs. |
| Hole Width: 3.560" |
| Hole Depth: 1.250" |
| Overall Swivel Height: 1.500" |
| Overall Top Length: 4.750" |
| Overall Top Width: 2.125" |
Features
- Swivel Top Hole Pattern Measures 3-9/16" x 1-1/4"
- Low Profile - 1" tall
- 45 Position Automatic Locking Top
- Push-Button Top Release Mechanism
- Molded from DuPont Nylon and assembled with Stainless Steel Springs and Screws
- Engineered to high standards
- Superior grade materials for unbeatable safety and comfort
- Designed to keep your belongings secure and organized
When using the unique Swivel Feature of these Swivel Mounts to rotate your electronic unit, the Push Button Release and/or Lever Release MUST NOT BE USED TO ROTATE THE SWIVEL TOP. Doing so, especially while under power, could result in sudden loss of Electronic Unit. The Push Button and/or Lever Release is to be used ONLY FOR TOP REMOVAL.
To Re-engage the Swivel Top/Electronic Unit into the Johnny Ray Base, simply install the top stem back into the base and firmly press down until you hear a definitive POP. Once you hear this sound, rotate the Electronic Unit back and forth to check for proper installation. IF YOU CANNOT HEAR THE RATCHETING SOUND WHEN YOU ROTATE THE TOP, YOUR TOP HAS NOT BEEN PROPERLY RE-ENGAGED IN THE SWIVEL BASE. Your Swivel Top should also sit completely down onto the base with no gaps. If there is a gap, your top is not fully seated.
Swivel Mounts feature an automatically locking Swivel Top to hold your Electronic Unit in its turned position (hence the ratcheting sound you hear when turning it). This sound is completely normal. This is also one of its strong features, as it allows you to rotate the top with just one hand, at any boating speed or condition.
Where mounting space is scarce, and craftsmanship and ease of installation are of top priority, Johnny Ray® will hit the spot. For years, the company has been leading the way with high-quality mounting solutions for marine electronics. From swivel mounts and mounting plates to transducer mounting brackets and battery terminals, Johnny Ray has everything you need to make installing electronic units onto your boat a quick and easy process. Johnny Ray also has an exclusive line of prime electronics mounting solutions for fire, rescue, and emergency vehicles. So no matter, whether you’re about being first on the water, or first on the scene, time-saving Johnny Ray mounting hardware is just the ticket. All Johnny Ray products are proudly made in the USA to give you the durability and quality that are second to none.