Product Details
Hydraulic Trim Tab Kit with Rocker Switch, Pair (N129000) by Insta-Trim®. 12 gauge 304 stainless steel trim tabs are guaranteed against electrolysis, remaining strong and secure. Insta-Trim systems use hinges that prevent most spray and can be used for transom or bottom mounting.
Specifications
| Recommended boat length: 18' - 22' |
| Dimensions: 12" L x 9" W |
| Supply Voltage: 12 V |
Features
- Engineered to high standards
- High-grade design delivers extended lifespan
- Made with premium materials
Wiring
- Color-coded wiring in with quick connects fittings, meets Federal standards for heat, pull and insulation, making installation easy.
Solenoids
- The solenoids are custom designed for Insta-Trim Boat Leveler company, epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating drift back. Barb type hose fittings provide tight, secure connections.
Motor
- A powerhouse with coated wiring that resists temperature and Amperage build-up. 1 3/4" stack windings and top mounting eliminates oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled. One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied.
Brackets
- Swivel type brackets allow cylinders to be mounted and adjusted to any angle. Knockout pins act as shear pins if the tab strikes an object.
Pump
- Designed and engineered exclusively by Insta-Trim. The built-in bypass is factory set at 400 psi, tolerance held to +/-. 00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.
Motor Cover
- 4-1/2" D x 6"W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Insa-Trim cover protects the motor from occasional wash down.
Cylinders
- Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus o-rings, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular steel rod prevents hose blow-off and breakage. A stainless steel spring retracts the cylinder when the boat is not in motion.
Hose
- Designed and manufactured exclusively for Insta-Trim with nylon reinforced webbing and a UV resistant coating. Rated at 2000 lb. Burst pressure, 15; of hose is supplied for your system. Stainless steel clamps hold the hose to barb fittings at the solenoids and at the cylinder connection.
Rocker Type Controls
- Mounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.
One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied.
Insta-Trim® is a renowned manufacturer of premium quality trim tabs for marine applications. The company takes pride in its products, thinking they are some of the finest upgrades you can do to your boat to increase its performance along with your safety and comfort. Insta-Trim provides one of the industry’s best model coverage, offering trim tabs for almost any boat available on the market. It works hard to give you a more enjoyable, fuel-saving ride with a simple touch of a button.