Product Details
Corrosion Block™ 12 oz. Cleaner Spray (CB-12) by H & M Marine®. Corrosion is a natural process which converts most metals by either a chemical or electrochemical reaction into a stable metallic compound such as oxide, hydroxide or sulfate. The environment and preventative maintenance greatly influence the rate at which metals corrode. Metals that are exposed to marine atmospheres, moisture and tropical temperatures have the highest rate of corrosion. Corrosion Block helps you isolate moisture from the metal surface, so the process stops.
Specifications
| Volume: 12 oz. |
Features
- State-of-the-art anti-corrosion/lubricant compound that has been specifically designed for marine use
- Displaces moisture
- Clean, clear, ultra-thin fluid compound which leaves a non-greasy atmospheric barrier to protect metal
- Leaves no gummy residue
- Protects the flexibility of rubber
- Excellent penetrant and lubricant
- Contains no wax, tar, asphalt, silicon, or teflon
- Kills corrosion and prevents future corrosion from occuring
- Frees metal parts that are frozen by corrosion
- Protects electrical systems and electronics from salt water, moisture, and corrosion
- Protects fishing tackle, guns, and outboard engines from corrosion
Curtains
Treat zippers and snaps on the bridge curtains with Corrosion Block to lubricate the zippers and eliminate corrosion that can cause poor operation of both metal and plastic parts.
Engine Room
Proper engine room maintenance on a routine basis will extend the life of the major running gear of your boat. Observations made during engine room maintenance can eliminate costly breakdowns by spotting oil and fuel leaks, worn belts, faulty wiring, etc.
Take a wet/dry vac and several disposable paint brushes into the engine room. 1st remove all particles of debris (e. g., wood chips, wire ties, nuts & bolts, etc.). Clean the exterior of your engines and generator. This will allow you to spot oil leaks and general problems that may be overlooked. Use OrBilge, 2 oz. per 3 gallons of water for cleaning. If the engines are extremely dirty, use "Gunk" to clean following directions on the container. Treat the engines and all electrical connections with Corrosion Block to prevent rust and corrosion. Clean chrome or stainless parts on the engines with metal wax/cleaner and treat with Corrosion Block.
Electrical System and Electrical Connections
Treat the entire electrical system and the electronic connections with Corrosion Block to kill corrosion, the green and gray stuff, and prevent future problems. Use Corrosion Block in fuse panels, marina electrical posts, electric motors, electric switches and relays, auto electrical systems, and anywhere moisture creates problems. Corrosion Block does not contain wax, tar, asphalt,or silicone.
Fishing Tackle & Guns
Rinse tackle well with water and wash with OrPine Boat Soap. Rinse, dry, and treat with Corrosion Block. Corrosion Block will not harm nylon or polyester line. Wipe guns until dry, clean, and treat with Corrosion Block. Use Corrosion Block in the barrel and internal areas to treat and prevent corrosion and rust. Wipe the outside with Corrosion Block to prevent fingerprint rust spots.
At H & M Marine®, they have carefully selected a product line that provides all the cleaners that will allow you to keep your boats, cars, and planes running smoothly and looking like new. Since the 1960s, H & M Marine has been a leading company for cleaning and waxing boats, trailers, and recreational vehicles. It has a talented team that consists of professionals who utilize all their experience and expertise to create the most advanced solutions to meet the highest customers' demands and expectations. Ensuring the highest quality of its products, H & M Marine has earned a solid reputation and is trusted globally.