Product Details
ML-ACR Automatic Charging Relay with Manual Control (7623100) by Blue Sea Systems®. Nominal Voltage: 24V DC. Control Circuit Connection: Deutsch DTM. 500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine.
Specifications
Control Circuit Connection: Deutsch DTM |
Nominal Voltage: 24V DC |
Manual Control: Yes |
Engine Isolation: Yes |
Mounting: #10 |
Start Assist: Yes |
Start Isolation: Yes |
Amperage Operating Current: 13mA |
Amperage Operating Current when changing state: 7.0A |
Terminal Stud Torque: 140 in-lb (15.82 Nm) |
Continuous Rating: 500A |
Intermittent Rating: 700A (5 min) |
Cranking Rating 30 sec: 1450A DC |
Cable Size to Meet Ratings: 4/0 AWG x 2 |
Live Current Switching: 300A @ 12V DC |
Switching Cycles: 100000 |
Terminal Ring Diameter Clearance: 1.18in (29.97 mm) |
Terminal Stud Length: 1.50in (38.1 mm) |
Terminal Stud Size: 3/8" - 16 (M10) |
Relay Contact Position: SPEC_HEADER |
Combine 30 sec: 27.0V |
Combine 90 sec: 26.0V |
Open 10 sec: 24.7V |
Open 30 sec: 25.5V |
Open High: 32.4V |
Includes
- PN: 2146 - Qty: 1 - Product: SPDT Remote Control Contura Switch - ON-OFF-ON
Features
- Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing
- Automatically manages the charging of two large battery banks
- Allows paralleling of battery banks for emergency starting
- 500 Ampere continuous rating to support high-output alternators
- Magnetic Latch (ML)-ACR draws very low current (
Optional Accessories:
9160 - ML Series Link Bus
Regulatory Specifications
CE Marked - The CE marking is applied to products regulated by certain European health, safety and environmental protection legislation. The CE marking is obligatory for products it applies to. The manufacturer affixes the marking certifying that the product conforms to applicable regulations, in order to be allowed to sell the product in the European market.
Ignition Protected
IP66 - Dust tight. No Ingress of dust. Two to eight hours. Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities.
ISO 8846
SAE J1171 - Ignition Protected
Blue Sea Systems® engineers and manufactures electrical products for harsh environments in the marine, industrial, and heavy truck industries. Their engineered products are created by an in-house team of engineers who have experience in mechanical, electrical, industrial, electronic, and software design. Extensive testing is performed on all products. Blue Sea Systems` in-house lab is used to load test, thermal test, and water test products to ensure they will perform under marine conditions. Blue Sea Systems delivers innovative, reliable products for the marine industry.