Product Details
HRC10 Series 1870 lb 5/8" Line, 3/8" Chain Gypsy Only Horizontal Line/Chain Windlass by Maxwell®. Maxwell's all new HRC10 Horizontal Series represents yet another breakthrough in performance and anchor handling excellence. These horizontal, fully automatic rope/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 metres (52 feet), which require a completely above deck installation system. The modern appearance of the HRC10 Series retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.
Specifications
| Maximum Pull: 1870 lb |
| Static Hold: 3300 lb |
| Chain Short Link: 3/8" |
| Rope Size (Nylon 3 Strand Or 8 Plait): 5/8" |
| Chain Speed: 79'/min |
| Rope Speed: 66'/min |
| Power Supply (DC): 12 V |
| Motor Power: 1200 Watt |
| Net Weight (Electric): 44 lb |
| Hydraulic Pressure: 2000 Psi |
| Hydraulic Flow: 5.3 US Gal/Min |
| Net Weight (Hyd): 28-1/2 lb |
Features
- The all new HRC10 fully automatic horizontal windlass series is designed to effortlessly retrieve and deploy 8mm (5/16") and 10mm (3/8") short link chain and 14mm (9/16") and 16mm (5/8") three strand or 8-brait (plait) rope
- The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
- The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section
- This two piece watertight case allows for quick and easy, on-deck, routine maintenance
- Simple bolt down installation ensures effortless and rapid on-deck installation and set up
- The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
- The new and revolutionary patented Wave Design™chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series
- The unique Maxwell wrap around horizontal chainwheel ensures that more than 90°of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs
- The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system
- The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
- Cone type clutch/brake mechanism permits manual, free fall anchoring and emergency crank recovery of the rode and anchor if required
- The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel.
Maxwell once again leads the market in innovative thinking with the introduction of their latest Wave Design™ chainwheel. This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.
As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope compared to all other products on the market. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.
Maxwell® has long been recognised as the industry leader when it comes to innovative design of anchoring equipment. By employing top calibre people with solid theoretical and practical backgrounds in the marine industry, Maxwell is able to satisfy the needs of a demanding market with the design of product that consistently exceeds the expectations of its customers.